Problems about connecting to the hub via adsl (croatia)

[hrupnik]

I can only create (run) hub when I connect to the internet via 56K modem (HUB is running normally). Problems appears when I want to connect to the HUB from other computer witch is connected to the internet via ADSL. All firewalls are disabled, I am in passive mod.

[lighty]

I guess you will have to configure your DLS terminal to work in bridge mode. You can call HT help desk and tell them what you plan to do but they won't be of much help. So you can also follow this config procedure. Works with Ericsson HM210di.

1. Home/Quick Configuration
ATM Interface 0
Operation Mode Enabled
Encapsulation 1483 Bridged IP LLC
VPI 0
VCI 33
Bridge Enabled
IGMP Enabled
Use DHCP Enable
Default Route Disabled
USer/Pass: Nista
Use DNS Enable

2.Services/Firewall
Attack Protection Enable
DOS Protection Enable
25
25
75

3.LAN/LAN Config
IGMP Enable

4. LAN/DHCP Relay
eth-0 ADD

5. LAN/DHCP Mode
DHCP Relay

6. Install and run RASPPPoE


P.S.
They changed default web interface IP so you will have to reset DLS terminal by pressing reset button three times and then you would be able to access it via IP http://192.168.1.1 User/Pass: root/root

[hrupnik]

Thanks very much !!!!!